R0106-HP MSR Router Series Security Command Reference(V7)

49
display radius scheme
Use display radius scheme to display the configuration of RADIUS schemes.
Syntax
display radius scheme [ radius-scheme-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
radius-scheme-name: Specifies a RADIUS scheme by its name, a case-insensitive string of 1 to 32
characters. If you do not specify a RADIUS scheme, this command displays the configuration of all
RADIUS schemes.
Examples
# Display the configuration of all RADIUS schemes.
<Sysname> display radius scheme
Total 1 RADIUS schemes
------------------------------------------------------------------
RADIUS Scheme Name : radius1
Index : 0
Primary Auth Server:
IP : 2.2.2.2 Port: 1812
State: Active
VPN : vpn1
Test profile: 132
Probe username: test
Probe interval: 60 minutes
Primary Acct Server:
IP : 1.1.1.1 Port: 1813
State: Active
VPN : Not configured
Second Auth Server:
IP : Not configured Port: 1812
State: Block
VPN : Not configured
Test profile: Not configured
Second Acct Server:
IP : 3.3.3.3 Port: 1813
State: Block (Mandatory)
VPN : Not configured
Security Policy Server:
Server: 0 IP: 2.2.2.2 VPN: Not configured
Server: 1 IP: 3.3.3.3 VPN: 2