R0106-HP MSR Router Series Security Command Reference(V7)

62
A newly specified public-network source IP address overwrites the previous one. Each VPN can have at
most one private-network source IPv4 address and one private-network source IPv6 address.
When you use both the nas-ip command and radius nas-ip command, the following guidelines apply:
• The setting configured by the nas-ip command in RADIUS scheme view is only for the RADIUS
scheme.
• The setting configured by the radius nas-ip command in system view is for all RADIUS schemes.
• The setting in RADIUS scheme view takes precedence over the setting in system view.
Examples
# Set the IP address for the device to use as the source address of the RADIUS packets to 129.10.10.1.
<Sysname> system-view
[Sysname] radius nas-ip 129.10.10.1
Related commands
nas-ip (RADIUS scheme view)
radius session-control enable
Use radius session-control enable to enable the session-control feature.
Use undo radius session-control enable to restore the default.
Syntax
radius session-control enable
undo radius session-control enable
Default
The session-control feature is disabled and the UDP port 1812 is closed.
Views
System view
Predefined user roles
network-admin
Usage guidelines
The session-control feature enables the device to receive RADIUS session-control packets on UDP port
1812 from a RADIUS server that runs on IMC.
Examples
# Enable the session-control feature.
<Sysname> system-view
[Sysname] radius session-control enable
radius scheme
Use radius scheme to create a RADIUS scheme and enter RADIUS scheme view.
Use undo radius scheme to delete a RADIUS scheme.
Syntax
radius scheme radius-scheme-name