R0106-HP MSR Router Series Voice Command Reference(V7)

5
Use undo calling-name to remove the calling name.
Syntax
calling-name text
undo calling-name
Default
No calling name is configured.
Views
FXS interface view
Predefined user roles
network-admin
Parameters
text: Specifies a calling name, a case-sensitive string of 1 to 50 characters.
Usage guidelines
The calling name can be sent only in the multiple-data-message format.
Use this command on the originating device.
Examples
# Configure the calling name as tony for FXS interface 2/1/1.
<Sysname> system-view
[Sysname] subscriber-line 2/1/1
[Sysname-subscriber-line2/1/1] calling-name tony
Related commands
• cid display
• cid send
• cid type
cable
Use cable to configure the cable type for an E&M interface.
Use undo cable to restore the default.
Syntax
cable { 2-wire | 4-wire }
undo cable
Default
The cable type is 4-wire.
Views
E&M interface view
Predefined user roles
network-admin