R0106-HP MSR Router Series Voice Command Reference(V7)

114
Syntax
asserted-id { pai | ppi }
undo asserted-id
Default
SIP messages do not carry the P-Asserted-Identity or P-Preferred-Identity header field.
Views
SIP view
Predefined user roles
network-admin
Parameters
pai: Adds the P-Asserted-Identity header field into SIP messages.
ppi: Adds the P-Preferred-Identity header field into SIP messages.
Examples
# Add the P-Asserted-Identity header field into SIP messages.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] asserted-id pai
bind
Use bind to configure global source interface binding for outbound SIP messages or media packets.
Use undo bind to remove the global source interface binding.
Syntax
bind { control | media } source interface interface-type interface-number
undo bind { control | media }
Default
The egress interface is used as the source interface of SIP messages or media packets.
Views
SIP view
Predefined user roles
network-admin
Parameters
control: Specifies outbound SIP messages.
media: Specifies outbound media packets.
source interface interface-type interface-number: Uses the specified source interface as the source
interface of outbound SIP messages or media packets. The specified interface must be a Layer 3 Ethernet
interface or dialer interface.