R0106-HP MSR Router Series Voice Command Reference(V7)

116
Views
SIP view
Predefined user roles
network-admin
Parameters
ssl-client-policy client-policy-name: Specifies an SSL client policy by its name, a case-insensitive string of
1 to 31 characters.
ssl-server-policy server-policy-name: Specifies an SSL server policy by its name, a case-insensitive string
of 1 to 31 characters.
Usage guidelines
To enable the device to receive TLS requests, specify the SSL client and server policies to be used by TLS
and then enable the TLS listening port by using the transport command.
You must disable the TLS listening port before you can use a new SSL server policy or modify the
configuration of the existing SSL server policy.
If you use a new SSL client policy or modify the configuration of the existing SSL client policy, the new
policy applies only to new TLS connections, and existing TLS connections still use the original SSL client
policy.
Examples
# Configure TLS to use the SSL server policy named Server1 and the SSL client policy named Server2.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] crypto ssl-server-policy Server1
[Sysname-voice-sip] crypto ssl-client-policy Server2
Related commands
transport
display voice sip call
Use display voice sip call to display information about SIP calls.
Syntax
display voice sip call
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about SIP calls.
<Sysname> display voice sip call
SIP UAC Call Information