R0106-HP MSR Router Series Voice Command Reference(V7)

7
Syntax
cid receive
undo cid receive
Default
CID receiving is enabled for an FXO interface.
Views
FXO interface view
Predefined user roles
network-admin
Usage guidelines
CID receiving must be enabled for the CID function to work correctly.
Examples
# Enable CID receiving on FXO interface 2/2/1.
<Sysname> system-view
[Sysname] subscriber-line 2/2/1
[Sysname-subscriber-line2/2/1] cid receive
cid ring
Use cid ring to configure the time for CID detection and the number of rings the FXO interface receives
before going off-hook.
Use undo cid ring to restore the default.
Syntax
cid ring { 0 | 1 | 2 } [ times ]
undo cid ring
Default
The FXO interface performs CID detection between the first and the second rings, and it goes off-hook
immediately after the CID detection is completed. The cid ring 1 0 command applies.
Views
FXO interface view
Predefined user roles
network-admin
Parameters
0: Detects CID before the rings.
1: Detects CID between the first ring and the second ring.
2: Detects CID between the second ring and the third ring.
times: Specifies the number of rings before the FXO interface goes off-hook after CID detection. The value
is in the range of 0 to 5. The greater the value is, the later the FXO line goes off-hook.