R0106-HP MSR Router Series Voice Command Reference(V7)

137
pstn-code: Specifies a PSTN cause code in Table 28.
Examples
# Map the SIP status code 486 to the PSTN cause code 18.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] set sip-status 486 pstn-cause 18
sip
Use sip to enter SIP view.
Use undo sip to remove the settings from SIP view.
Syntax
sip
undo sip
Views
Voice view
Predefined user roles
network-admin
Examples
# Enter SIP view.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip]
srtp
Use srtp to configure SRTP as the media stream protocol for SIP calls.
Use undo srtp to restore the default.
Syntax
srtp [ fallback ]
undo srtp
Default
The global media stream protocol for SIP calls is RTP. The media stream protocol for SIP calls on a VoIP
entity is the same as the global default.
Views
SIP view, VoIP entity view
Predefined user roles
network-admin