R0106-HP MSR Router Series Voice Command Reference(V7)

158
Use undo fax local-train threshold to restore the default.
Syntax
fax local-train threshold threshold
undo fax local-train threshold
Default
The local training threshold is 10.
Views
POTS entity view, VoIP entity view
Predefined user roles
network-admin
Parameters
threshold: Specifies the local training threshold in percentage, in the range of 0 to 100.
Usage guidelines
If the threshold value is exceeded during rate training, the rate training failed.
The threshold configured with the fax local-train threshold command is valid only when the local training
mode is used.
Examples
# Configure the local training threshold as 20 for POTS entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] fax local-train threshold 20
Related commands
fax train-mode
fax nsf
Use fax nsf to configure an NSF code for nonstandard capabilities negotiation.
Use undo fax nsf to restore the default.
Syntax
fax nsf value
undo fax nsf
Default
The NSF code is 000000.
Views
POTS entity view, VoIP entity view
Predefined user roles
network-admin