R0106-HP MSR Router Series Voice Command Reference(V7)

161
• If G.726 is used, the maximum fax rate is 14400 bps, and the corresponding modem standard is
V.17.
• If G.729 is used, the maximum fax rate is to 7200 bps, and the corresponding modem standard is
V.29.
Usage guidelines
If the rate is set to a value other than disable and voice, the maximum rate is first used during rate training.
If the negotiation fails, the next lower supported rate is used.
Examples
# Configure the maximum fax rate for rate training as 9600 bps for POTS entity 4.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 4 pots
[Sysname-voice-dial-entity4] fax rate 9600
fax train-mode
Use fax train-mode to configure a rate training mode.
Use undo fax train-mode to restore the default.
Syntax
fax train-mode { local | ppp }
undo fax train-mode
Default
Point-to-point training is used.
Views
POTS entity view, VoIP entity view
Predefined user roles
network-admin
Parameters
local: Uses the local training mode.
ppp: Uses the point-to-point training mode.
Examples
# Configure the local training mode for POTS entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] fax train-mode local
Related commands
fax local-train threshold