R0106-HP MSR Router Series Voice Command Reference(V7)

16
undo delay rising
Default
The delay time is 300 milliseconds.
Views
E&M interface view
Predefined user roles
2: System level
Parameters
rising milliseconds: Specifies the delay time from when the terminating side detects a seizure signal to
when it sends the seizure signal in the delay start mode. The value range is 20 to 2000 milliseconds.
Examples
# Set the delay time from when the terminating side detects a seizure signal to when it sends the seizure
signal in the delay start mode to 700 milliseconds for E&M interface 2/3/1.
<Sysname> system-view
[Sysname] subscriber-line 2/3/1
[Sysname-subscriber-line2/3/1] signal delay
[Sysname-subscriber-line2/3/1] delay rising 700
Related commands
signal
delay send-dtmf
Use delay send-dtmf to configure a delay before the originating side sends DTMF tones in immediate
start mode.
Use undo delay send-dtmf to restore the default.
Syntax
delay send-dtmf milliseconds
undo delay send-dtmf
Default
The delay before the originating side sends DTMF tones in immediate start mode is 300 milliseconds.
Views
E&M interface view
Predefined user roles
network-admin
Parameters
send-dtmf milliseconds: Specifies the delay in the range of 50 to 5000 milliseconds.
Examples
# Set the delay before the originating side sends DTMF tones in immediate start mode to 3000
milliseconds for E&M interface 2/3/1.
<Sysname> system-view