R0106-HP MSR Router Series Voice Command Reference(V7)

17
[Sysname] subscriber-line 2/3/1
[Sysname-subscriber-line2/3/1] signal immediate
[Sysname-subscriber-line2/3/1] delay send-dtmf 3000
Related commands
signal
delay send-wink
Use delay send-wink to configure a delay from when the terminating side receives a seizure signal to
when it sends a wink signal in wink start mode.
Use undo delay send-wink to restore the default.
Syntax
delay send-wink milliseconds
undo delay send-wink
Default
The delay from when the terminating side receives a seizure signal to when it sends a wink signal is 200
milliseconds in wink start mode.
Views
E&M interface view
Predefined user roles
network-admin
Parameters
milliseconds: Specifies the delay in the range of 100 to 5000 milliseconds.
Examples
# Set the delay from when the terminating side receives a seizure signal to when it sends a wink signal
in wink start mode to 700 milliseconds for E&M interface 2/3/1.
<Sysname> system-view
[Sysname] subscriber-line 2/3/1
[Sysname-subscriber-line2/3/1] signal wink
[Sysname-subscriber-line2/3/1] delay send-wink 700
Related commands
signal
delay start-dial
Use delay start-dial to configure the dial delay time for an FXS interface or FXO interface.
Use undo delay start-dial to restore the default.
Syntax
delay start-dial seconds
undo delay start-dial