R0106-HP MSR Router Series Voice Command Reference(V7)

18
Default
The dial delay time is 1 second.
Views
FXS interface view, FXO interface view
Predefined user roles
network-admin
Parameters
seconds: Specifies the dial delay time in the range of 0 to 10 seconds.
Examples
# Set the dial delay time to 5 seconds for FXS interface 2/1/1.
<Sysname> system-view
[Sysname] subscriber-line 2/1/1
[Sysname-subscriber-line2/1/1] delay start-dial 5
delay wink-hold
Use delay wink-hold to configure the duration for which the terminating side sends wink signals in wink
start mode.
Use undo delay wink-hold to restore the default.
Syntax
delay wink-hold milliseconds
undo delay wink-hold
Default
The terminating side sends wink signals for 500 milliseconds in wink start mode.
Views
E&M interface view
Predefined user roles
network-admin
Parameters
milliseconds: Specifies the duration for which the terminating side sends wink signals in wink start mode.
The value range is 100 to 3000 milliseconds.
Examples
# Set the duration for which E&M interface 2/3/1 sends wink signals in wink start mode to 700
milliseconds.
<Sysname> system-view
[Sysname] subscriber-line 2/3/1
[Sysname-subscriber-line2/3/1] signal wink
[Sysname-subscriber-line2/3/1] delay wink-hold 700
Related commands
signal