R0106-HP MSR Router Series Voice Command Reference(V7)

19
delay wink-rising
Use delay wink-rising to configure the timeout time for the originating side to wait for a wink signal after
sending a seizure signal in wink start mode.
Use undo delay wink-rising to restore the default.
Syntax
delay wink-rising milliseconds
undo delay wink-rising
Default
The timeout time for the originating side to wait for a wink signal after sending a seizure signal is 2000
milliseconds in wink start mode.
Views
E&M interface view
Predefined user roles
network-admin
Parameters
milliseconds: Specifies the timeout time in the range of 100 to 5000 milliseconds.
Examples
# Set the timeout time to 2000 milliseconds for E&M interface 2/3/1.
<Sysname> system-view
[Sysname] subscriber-line 2/3/1
[Sysname-subscriber-line2/3/1] signal wink
[Sysname-subscriber-line2/3/1] delay wink-rising 2000
Related commands
signal
description
Use description to configure a description for a voice interface.
Use undo description to restore the default.
Syntax
description text
undo description
Default
The description for a voice interface is interface name Interface, for example, Subscriber-line2/1/1
Interface.
Views
FXS interface view, FXO interface view, E&M interface view
Predefined user roles
network-admin