R0106-HP MSR Router Series Voice Command Reference(V7)

39
Predefined user roles
network-admin
Examples
# Shut down FXS interface 2/1/1.
<Sysname> system-view
[Sysname] subscriber-line 2/1/1
[Sysname-subscriber-line2/1/1] shutdown
signal
Use signal to configure a start mode for an E&M interface.
Use undo signal to restore the default.
Syntax
signal { delay | immediate | wink }
undo signal
Default
An E&M interface uses the immediate start mode.
Views
E&M interface view
Predefined user roles
network-admin
Parameters
delay: Specifies delay start mode.
immediate: Specifies immediate start mode.
wink: Specifies wink start mode.
Usage guidelines
You must configure the same start mode on the originating and terminating devices.
Examples
# Configure the delay mode for E&M interface 2/3/1.
<Sysname> system-view
[Sysname] subscriber-line 2/3/1
[Sysname-subscriber-line2/3/1] signal delay
silence-detect threshold
Use silence-detect threshold to configure silence detection-based automatic on-hook.
Use undo silence-detect to restore the default.
Syntax
silence-detect threshold threshold time time-length
undo silence-detect