R0106-HP MSR Router Series Voice Command Reference(V7)

49
Default
The originating side requires the terminating side to send answer signals.
Views
R2 CAS view
Predefined user roles
network-admin
Usage guidelines
If the originating side does not require the terminating side to send answer signals, it directly establishes
a call with the terminating side. Otherwise, the originating side establishes a call with the terminating
side after receiving answer signals.
Examples
# Configure the originating side to not require the terminating side to send answer signals.
<Sysname> system-view
[Sysname] controller e1 2/4/1
[Sysname-E1 2/4/1] timeslot-set 0 timeslot-list 1-31 signal r2
[Sysname-E1 2/4/1] cas 0
[Sysname-cas 2/4/1:0] undo answer enable
callmode
Use callmode to configure the call connection mode.
Use undo callmode to restore the default.
Syntax
callmode { segment | terminal }
undo callmode
Default
The call connection mode is terminal.
Views
R2 CAS view
Predefined user roles
network-admin
Parameters
segment: Specifies the call connection mode as segment-to-segment.
terminal: Specifies the call connection mode as terminal-to-terminal.
Examples
# Set the call connection mode to segment.
<Sysname> system-view
[Sysname] controller e1 2/4/1
[Sysname-E1 2/4/1] timeslot-set 0 timeslot-list 1-31 signal r2
[Sysname-E1 2/4/1] cas 0
[Sysname-cas 2/4/1:0] callmode segment