R0106-HP MSR Router Series Voice Command Reference(V7)

50
cas
Use cas to enter R2 CAS view.
Use undo cas to exit R2 CAS view and delete the settings in R2 CAS view.
Syntax
cas ts-set-number
undo cas ts-set-number
Views
E1 interface view, T1 interface view
Predefined user roles
network-admin
Parameters
ts-set-number: Specifies a timeslot set by its number in the range of 0 to 30 for an E1 interface, or in the
range of 0 to 23 for a T1 interface.
Usage guidelines
The timeslot set specified in this command must have already been created using the timeslot-set
command.
Examples
# Enter the R2 CAS view of timeslot set 5.
<Sysname> system-view
[Sysname] controller e1 2/4/1
[Sysname-E1 2/4/1] timeslot-set 5 timeslot-list 1-31 signal r2
[Sysname-E1 2/4/1] cas 5
[Sysname-cas 2/4/1:5]
Related commands
timeslot-set
clear-forward-ack enable
Use clear-forward-ack enable to configure the terminating side to send a clear-back signal when the
originating side first disconnects the line.
Use undo clear-forward-ack enable to configure the terminating side to not send a clear-back signal
when the originating side first disconnects the line.
Syntax
clear-forward-ack enable
undo clear-forward-ack enable
Default
The terminating side does not send a clear-back signal when the originating side first disconnects the
line.
Views
R2 CAS view