R0106-HP MSR Router Series Voice Command Reference(V7)

53
Field Description
Call Status
• For R2:
{ Idle.
{ Seize.
{ Seize Ack.
{ Talking.
{ Releasing.
• For ISDN:
{ Idle
{ Call in.
{ Call out.
{ Ring.
{ Ringback tone.
{ Talking.
{ Releasing.
dl-bits
Use dl-bits to configure the ABCD bit pattern for line signals.
Use undo dl-bits to restore the default.
Syntax
dl-bits { answer | blocking | clear-back | clear-forward | idle | release-guard | seizing | seizing-ack }
{ receive | transmit } ABCD
undo dl-bits { answer | blocking | clear-back | clear-forward | idle | release-guard | seizing |
seizing-ack } { receive | transmit }
Default
The defaults are the values of the ITU-T standard, as shown in Table 5.
Table 5 Default values of signals in line signaling
Signal Default rx-bits
ABCD Default tx-bits ABCD
answer 0101 0101
blocking 1101 1101
clear-back 1101 1101
clear-forward 1001 1001
idle 1001 1001
seizing 0001 0001
seizing-ack 1101 1101
release-guard 1001 1001
Views
R2 CAS view