R0106-HP MSR Router Series Voice Command Reference(V7)

54
Predefined user roles
network-admin
Parameters
answer: Specifies the answer signal.
blocking: Specifies the blocking signal.
clear-back: Specifies the clear-back signal.
clear-forward: Specifies the clear-forward signal.
idle: Specifies the idle signal.
seizing: Specifies the seizure signal.
seizing-ack: Specifies the seizure acknowledgement signal.
release-guard: Specifies the release guard signal.
receive: Applies the signaling setting to received line signals.
transmit: Applies the signaling setting to transmitted line signals.
ABCD: Specifies the ABCD bit pattern of line signals, in the range of 0000 to 1111.
Examples
# Set the ABCD bit pattern to 1101 for received idle signals and to 1011 for transmitted idle signals.
<Sysname> system-view
[Sysname] controller e1 2/4/1
[Sysname-E1 2/4/1] timeslot-set 0 timeslot-list 1-31 signal r2
[Sysname-E1 2/4/1] cas 0
[Sysname-cas 2/4/1:0] dl-bits idle receive 1101
[Sysname-cas 2/4/1:0] dl-bits idle transmit 1011
dtmf enable
Use dtmf enable to enable DTMF to receive and send numbers.
Use undo dtmf enable to restore the default.
Syntax
dtmf enable
undo dtmf enable
Default
MFC is used to receive and send numbers.
Views
R2 CAS view
Predefined user roles
network-admin
Usage guidelines
According to R2 signaling, two modes can be used to send and receive numbers: