R0106-HP MSR Router Series Voice Command Reference(V7)

56
[Sysname] controller e1 2/4/1
[Sysname-E1 2/4/1] timeslot-set 0 timeslot-list 1-31 signal r2
[Sysname-E1 2/4/1] cas 0
[Sysname-cas 2/4/1:0] final-callednum enable
group-b enable
Use group-b enable to configure R2 signaling to use Group B signals to complete registers exchange.
Use undo group-b enable to configure R2 signaling to not use Group B signals to complete registers
exchange.
Syntax
group-b enable
undo group-b enable
Default
R2 signaling uses Group B signals to complete registers exchange.
Views
R2 CAS view
Predefined user roles
network-admin
Usage guidelines
R2 interregister signaling in some countries does not support Group B signals. You can configure the
undo group-b enable command to not use Group B signals.
Examples
# Configure R2 signaling to use Group B signals to complete registers exchange.
<Sysname> system-view
[Sysname] controller e1 2/4/1
[Sysname-E1 2/4/1] timeslot-set 0 timeslot-list 1-31 signal r2
[Sysname-E1 2/4/1] cas 0
[Sysname-cas 2/4/1:0] group-b enable
line
Use line to bind a digital voice interface to a POTS voice entity.
Use undo line to remove the binding.
Syntax
line line-number:{ ts-set-number | 15 | 23 }
undo line
Default
A digital voice interface is not bound to a POTS voice entity.
Views
POTS voice entity view