R0106-HP MSR Router Series Voice Command Reference(V7)

74
ts
Use ts to maintain specified timeslots.
Syntax
ts { block | open | query | reset } timeslots timeslots-list
Views
R2 signaling view
Predefined user roles
network-admin
Parameters
block: Blocks the specified timeslots to make them unavailable.
open: Opens the specified timeslots to make them available.
query: Queries the status of the specified timeslots to see whether they are busy, open, or blocked.
reset: Resets the specified timeslots. You must do this if the state of an administratively blocked or opened
timeslots cannot recover.
timeslots timeslots-list: Specifies a timeslot list. Timeslots are numbered 1 through 31 for an E1 interface
and 1 through 24 for a T1 interface. The timeslot list can contain one or more individual timeslots
separated by commas (for example, 1 or 1, 2, 4), a timeslot range (for example, 5-10), or a combination
of the two forms (for example, 1-14, 15, 17-31).
Examples
# Reset timeslots 1 through 15 in timeslot set 0.
<Sysname> system-view
[Sysname] controller e1 2/4/1
[Sysname-E1 2/4/1] timeslot-set 0 timeslot-list 1-31 signal r2
[Sysname-E1 2/4/1] cas 0
[Sysname-cas 2/4/1:0] ts reset timeslots 1-15