R0106-HP MSR Router Series Voice Command Reference(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

Field Description

Jitter-buffer initial delay This field is not supported and is reserved for future support.

Jitter-buffer minimum delay This field is not supported and is reserved for future support.

Jitter-buffer maximum delay This field is not supported and is reserved for future support.

IP media DSCP DSCP value of IP packets carrying streaming media.

Codec transparent State of transparent transmission of codecs: Enabled or Disabled.

Media flow-around State of the media flow-around function: Enabled or Disabled.

Voice class SIP early-offer forced State of DO-EO conversion: Enabled or Disabled.

Voice class SIP bind media Source interface of outgoing media streams.

Voice class SIP bind control Source interface of outgoing SIP messages.

Voice class codec Codec template bound to the voice entity.

Call-forwarding no-reply number

Destination number to which incoming calls will be forwarded

when the voice interface is not answered within a period of time.

Call-forwarding on-busy number

Destination number to which incoming calls will be forwarded

when the voice interface is busy.

Call-forwarding unavailable number

Destination number to which incoming calls will be forwarded

when the voice interface is shut down by executing the shutdown

command.

Call-forwarding unconditional number

Destination number to which incoming calls will be forwarded,

whether or not the voice interface is available.

Voice class SIP keepalive up-interval

Interval for the local end to send OPTIONS messages before

marking the voice entity unavailable.

Voice class SIP keepalive down-interval

Interval for the local end to send OPTIONS messages before

marking the voice entity available.

Voice class SIP keepalive retry

Number of keepalives sent before the status of the voice entity is

changed.

Fax cng-switch

CNG fax switchover status:

• Enabled.

• Disabled.

Fax level Transmit energy level.

Fax local-train threshold Threshold percentage of local training.

Fax nsf NSF code for nonstandard capabilities negotiation.

Fax rate Maximum fax rate for rate training.

Fax train-mode

Rate training mode:

• Local—Local training.

• PPP—Point-to-point training.

Fax ecm

Error Correction Mode status:

• Enabled.

• Disabled.