R0106-HP MSR Router Series Voice Command Reference(V7)

3
f1: Frequency 1 in Hz, in the range of 50 to 3600.
f2: Frequency 2 in Hz, in the range of 50 to 3600.
p1: Signal amplitude 1, in the range of 50 to 32767.
p2: Signal amplitude 2, in the range of 50 to 32767.
p3: Duration of a single tone in milliseconds, in the range of 10 to 1000.
p4: Duration error of a single tone in milliseconds, in the range of 0 to 500.
p5: Duration of silence in milliseconds, in the range of 10 to 1000.
p6: Duration error of silence in milliseconds, in the range of 0 to 500.
p7: Absolute difference between p3 and p5 in milliseconds, in the range of 0 to 500.
Usage guidelines
The busytone-detect custom command takes effect only on FXO interfaces.
The busy tone parameters customized by using the busytone-detect custom command take effect only
after the area custom command is configured.
Examples
# Customize busy tone parameters, and assign number 0 to the busy tone parameters.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] busytone-detect custom 2 1 99 450 450 8000 8000 800 300 500 500 500
Related commands
area
busytone-detect period
Use busytone-detect period to configure the number of busy tone detection periods for an FXO interface.
Use undo busytone-detect period to restore the default.
Syntax
busytone-detect period value
undo busytone-detect period
Default
The number of busy tone detection periods is 2.
Views
FXO interface view
Predefined user roles
network-admin
Parameters
value: Specifies the number of busy tone detection periods, in the range of 2 to 12. A greater value
means a longer busy tone detection time.