R0106-HP MSR Router Series Voice Command Reference(V7)

88
Syntax
outband nte
undo outband
Default
Inband DTMF is used.
Views
POTS entity view, VoIP entity view,
Predefined user roles
network-admin
Usage guidelines
HP recommends that you configure the outband nte command and the same payload type value on the
originating and terminating devices. Otherwise, DTMF tones might fail to be transmitted.
Examples
# Enable NTE mode for out-of-band DTMF.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 voip
[Sysname-voice-dial-entity10] outband nte
Related commands
rtp payload-type nte
rtp payload-type nte
Use rtp payload-type nte to configure the NTE payload type value in RTP packets.
Use undo rtp payload-type nte to restore the default.
Syntax
rtp payload-type nte value
undo rtp payload-type nte
Default
The NTE payload type value in RTP packets is set to 101.
Views
POTS entity view, VoIP entity view
Predefined user roles
network-admin
Parameters
value: Specifies the value of the NTE payload type in RTP packets, in the range of 96 to 127.
Usage guidelines
Do not set the payload type to 98, which has been used to identify nonstandard T38 fax packets.