R0106-HP MSR Router Series Voice Command Reference(V7)

89
When the device is connected to a device from another vendor, you cannot set the payload type field to
any value forbidden by that device. Otherwise, NTE negotiation might fail.
Examples
# Set the NTE payload type field to 102 for VoIP entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 voip
[Sysname-voice-dial-entity10] outband nte
[Sysname-voice-dial-entity10] rtp payload-type nte 102
Related commands
outband nte
shutdown
Use shutdown to shut down a voice entity.
Use undo shutdown to bring up a voice entity.
Syntax
shutdown
undo shutdown
Default
A voice entity is up.
Views
POTS entity view, VoIP entity view
Predefined user roles
network-admin
Examples
# Shut down POTS entity 10.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] dial-program
[Sysname-voice-dial] entity 10 pots
[Sysname-voice-dial-entity10] shutdown
vad-on
Use vad-on to enable VAD.
Use undo vad-on to disable VAD.
Syntax
vad-on [ g723r53 | g723r63 | g729a | g729r8 ] *
undo vad-on [ g723r53 | g723r63 | g729a | g729r8 ] *