R0106-HP MSR Router Series Voice Configuration Guide(V7)

100
Ste
p
Command Remarks
2. Enter voice view.
voice-setup N/A
3. Enter SIP view.
sip N/A
4. Specify TLS as the global transport
protocol for outgoing SIP calls.
session transport tcp [ tls ]
By default, UDP is used as the
global transport protocol.
Specifying TLS as the transport protocol for outgoing SIP calls on a VoIP entity
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Enter VoIP entity view.
entity entity-number voip N/A
5. Specify TLS as the transport
protocol for outgoing SIP calls.
session transport tcp [ tls ]
By default, the default global
transport protocol (UDP) is used.
Enabling the TLS listening port
To receive the packets transported over TLS, enable the TLS listening port.
To enable the TLS listening port:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP view.
sip N/A
4. Enable the TLS listening port.
transport tcp [ tls ]
By default, the TLS listening port is
disabled.
The undo transport command
removes established connections.
Setting the aging time for TLS connections
Perform this task to specify the amount of idle time that elapses before a TLS connection is removed.
To set the aging time for TLS connections:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP view.
sip N/A
4. Set the aging time for TLS
connections.
timers connection aging tls
tls-age-time
By default, the aging time for TLS
connections is 30 minutes.