R0106-HP MSR Router Series Voice Configuration Guide(V7)

126
Ste
p
Command Remarks
4. Configure the voice mail server
information for the SIP UA.
mwi-server { dns domain-name |
ip ip-address } [ port
port-number ] [ expires seconds ]
[ transport { tcp [ tls ] | udp } ]
[ scheme { sip | sips } ]
unsolicited
By default, no voice mail server
information is configured.
5. Configure the registrar
information for the SIP UA.
registrar registrar-index { ip
ip-address | dns domain-name }
[ port port-number ] [ expires
seconds ] [ refresh-ratio
ratio-percentage ]
By default, no registrar information
is configured.
Displaying and maintaining MWI
Execute the display commands in any view.
Task Command
Display MWI information for phone numbers
with subscription.
display voice mwi { all | number number }
Display subscription information for phone
numbers.
display voice sip subscribe-state
Call services configuration examples
This section provides call services configuration examples.
Call waiting configuration example
Network requirements
As shown in Figure 47, configure call waiting so when a subscriber places a call from Telephone C to
Telephone A (that is in a conversation with Telephone B), the subscriber at Telephone C hears ringback
tones, and the subscriber at Telephone A hears call waiting tones.
Figure 47 Network diagram