R0106-HP MSR Router Series Voice Configuration Guide(V7)

137
# Configure the local number as 2000 for POTS entity 2000, and bind FXS interface line 2/1/1
to the POTS entity.
[RouterB-voice-dial] entity 2000 pots
[RouterB-voice-dial-entity2000] line 2/1/1
[RouterB-voice-dial-entity2000] match-template 2000
[RouterB-voice-dial-entity2000] quit
[RouterB-voice-dial] quit
[RouterB-voice] quit
[RouterB-voice] quit
# Specify the IP address for the registrar and proxy server.
[RouterB-voice] sip
[RouterB-voice-sip] registrar 1 ip 100.1.1.101
[RouterB-voice-sip] proxy ip 100.1.1.101
Verifying the configuration
# Use the display voice mwi command to display the MWI information for phone number 1000.
# Use the display voice sip subscribe-state command to display the subscription information for phone
number 1000.
# Make a call from Telephone B to Telephone A, and do not pick up Telephone A. The call is forwarded
to the voice mailbox after the ringing timer expires. Then, the subscriber of Telephone B can leave a
message and hang up. The server sends a NOTIFY indicating that there is a new message in the mailbox
of Telephone A to the voice gateway. By picking up the phone, the subscriber of Telephone A can hear
the MWI tone, and then dial the voice mailbox access number to get the message.