R0106-HP MSR Router Series Voice Configuration Guide(V7)

ManualsBrandsHP ManualsNetwork HardwareHP MSR3024 TAA-compliant AC Router

Figure 13 Network diagram

Configuration procedure

1. Configure Router A:

# Configure the called number template as 210…. for VoIP entity 210, and configure the

destination IP address as 192.168.0.76.

<RouterA> system-view

[RouterA] voice-setup

[RouterA-voice] dial-program

[RouterA-voice-dial] entity 210 voip

[RouterA-voice-dial-entity210] match-template 210....

[RouterA-voice-dial-entity210] address sip ip 192.168.0.76

[RouterA-voice-dial-entity210] quit

# Configure the local number as 0101001 for POTS entity 0101001, and bind the FXS interface

line 2/1/1 to the POTS entity.

[RouterA-voice-dial] entity 0101001 pots

[RouterA-voice-dial-entity101001] match-template 0101001

[RouterA-voice-dial-entity101001] line 2/1/1

[RouterA-voice-dial-entity101001] quit

# Configure the called number template as .T for POTS entity 211 used for call backup on FXO

interface line 2/2/1, and configure the permitted calling number as 0101001.

[RouterA-voice-dial] entity 211 pots

[RouterA-voice-dial-entity211] match-template .T

[RouterA-voice-dial-entity211] line 2/2/1

[RouterA-voice-dial-entity211] send-number all

[RouterA-voice-dial-entity211] caller-permit 0101001

[RouterA-voice-dial-entity211] quit

[RouterA-voice-dial] quit

[RouterA-voice] quit

# Enable the PLAR function for the FXO interface line 2/2/1, and bind the FXS interface line 2/1/1

to the FXO interface line 2/2/1.

[RouterA] subscriber-line 2/2/1

[RouterA-subscriber-line2/2/1] private-line 0101001

[RouterA-subscriber-line2/2/1] hookoff-mode delay bind 2/1/1

2. Configure Router B:

# Configure the called number template as 010…. for VoIP entity 010, and configure the

destination IP address as 192.168.0.71.

Telephone A

0101001

PSTN

192.168.0.71/24

Router A

Router B

192.168.0.76/24

FXO2/2/1

FXS2/1/1

Telephone B

2101002

FXS2/1/1

FXO2/2/1