R0106-HP MSR Router Series Voice Configuration Guide(V7)

<RouterB> system-view

[RouterB] voice-setup

[RouterB-voice] dial-program

[RouterB-voice-dial] entity 010 voip

[RouterB-voice-dial-entity10] match-template 010....

[RouterB-voice-dial-entity10] address sip ip 192.168.0.71

[RouterB-voice-dial-entity10] quit

# Configure the local number as 2101002 for POTS entity 2101002, and bind the FXS interface

line 2/1/1 to the POTS entity.

[RouterB-voice-dial] entity 2101002 pots

[RouterB-voice-dial-entity2101002] match-template 2101002

[RouterB-voice-dial-entity2101002] line 2/1/1

[RouterB-voice-dial-entity2101002] quit

# Configure the called number template as .T for POTS entity 011 used for call backup on FXO

interface line 2/2/1, and configure the permitted calling number as 2101002.

[RouterB-voice-dial] entity 011 pots

[RouterB-voice-dial-entity11] match-template .T

[RouterB-voice-dial-entity11] line 2/2/1

[RouterB-voice-dial-entity11] send-number all

[RouterB-voice-dial-entity11] caller-permit 2101002

[RouterB-voice-dial-entity11] quit

[RouterB-voice-dial] quit

[RouterB-voice] quit

# Enable the PLAR function for the FXO interface line 2/2/1, and bind the FXS interface line 2/1/1

to the FXO interface line 2/2/1.

[RouterB] subscriber-line 2/2/1

[RouterB-subscriber-line2/2/1] private-line 2101002

[RouterB-subscriber-line2/2/1] hookoff-mode delay bind 1/0

Verifying the configuration

# When the IP network is available, place a call to verify that the call is established through the IP

network.

# When the IP network is unavailable, place a call to verify that the call is established through the PSTN.