R0106-HP MSR Router Series Voice Configuration Guide(V7)

54
Step Command Remarks
5. Configure a codec for the
POTS entity.
codec { g711alaw | g711ulaw |
g723r53 | g723r63 | g726r16 |
g726r24 | g726r32 | g726r40 |
g729a | g729br8 | g729r8 }
[ bytes payload-size ]
By default, no codecs are
configured.
To configure codecs for a POTS entity (method 2):
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter voice view.
voice-setup N/A
3. Create a codec template.
voice class codec tag
By default, no codec templates
exist.
4. Assign a priority to a codec in
the codec template.
codec preference priority
{ g711alaw | g711ulaw |
g723r53 | g723r63 | g726r16 |
g726r24 | g726r32 | g726r40 |
g729a | g729br8 | g729r8 }
[ bytes payload-size ]
By default, no codecs exist in a
template.
Repeat this command to assign
priorities to more codecs.
5. Return to voice view.
quit N/A
6. Enter dial program view.
dial-program N/A
7. Create a POTS entity and enter
POTS entity view.
entity entity-number pots N/A
8. Bind the codec template to the
POTS entity.
voice-class codec tag
By default, the binding does not
exist.
Configuring a POTS entity to register with the registrar
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Create a POTS entity and enter
POTS entity view.
entity entity-number pots N/A
5. Configure the POTS entity to
register with the registrar
server.
register number
By default, a POTS entity initiates a
registration to the registrar server
after the SIP registration
configuration is complete.
If you do not want to register a
number or you want to deregister a
number from the registrar server,
you can use the undo register
number command.