R0106-HP MSR Router Series Voice Configuration Guide(V7)

57
Configuring a VoIP entity
This section covers the procedures for creating and configuring a VoIP entity.
Configuration task list
To configure a VoIP entity, perform the following tasks:
Tasks at a glance
(Required.) Creating a VoIP entity and configuring basic parameters
(Optional.) Configuring codecs for a VoIP entity
(Optional.) Configuring DTMF for a VoIP entity
(Optional.) Setting the DSCP value for a VoIP entity
(Optional.) Enabling VAD for a VoIP entity
(Optional.) Configuring options related to dial program
Creating a VoIP entity and configuring basic parameters
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Create a VoIP entity and enter
VoIP entity view.
entity entity-number voip
By default, no VoIP voice entities
exist.
5. (Optional.) Configure a
description for the VoIP entity.
description string
By default, no description is
configured.
6. Configure a number template
for the POTS entity.
match-template match-string
By default, no number template is
configured for the POTS entity.
The POTS entity uses the number
template to match phone numbers.
For example, the match-template
20 command matches all numbers
beginning with 20.
7. Configure the destination IP
address.
address sip ip ip-address [ port
port-number ]
By default, no destination IP
address is configured.
For more information about this
command, see Voice Command
Reference.
8. Enable the VoIP entity.
undo shutdown By default, a VoIP entity is enabled.