R0106-HP MSR Router Series Voice Configuration Guide(V7)

Configuring dial programs

This chapter describes using dial programs to define call control policies such as caller control, number

substitution, call sending, and number match policies.

Configuration task list

Tasks at a

lance

(Optional.) Configuring caller control

(Optional.) Configuring caller group control

(Optional.) Enabling private line auto ring-down

(Optional.) Configuring a number match mode

(Optional.) Configuring the maximum number of total calls allowed by a voice entity

(Optional.) Configuring number substitution

(Optional.) Configuring a priority for a voice entity

(Optional.) Configuring a number sending mode

(Optional.) Configuring a dial prefix

Configuring caller control

Caller control allows you to filter outgoing calls on the calling side or filter incoming calls on the called

side based on calling numbers.

Procedure

To configure caller control:

Step Command Remarks

1. Enter system view.

system-view N/A

2. Enter voice view.

voice-setup N/A

3. Enter dial program view.

dial-program N/A

4. Create a voice entity and enter

voice entity view.

entity entity-number { pots | voip }

N/A

5. Configure permitted calling

numbers.

caller-permit calling-string

By default, the voice entity permits

all calling numbers.

The calling-string argument is in the

format of { [ + ] string [ $ ] }| $. For

details, see Voice Command

Reference.