R0106-HP MSR Router Series Voice Configuration Guide(V7)

64
Configuring a subscriber group
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Create a subscriber group and
enter subscriber group view.
subscriber-group group-id
By default, no subscriber group
exists.
You can configure a maximum of
10 subscriber groups.
5. (Optional.) Configure a
description for the subscriber
group.
description text
By default, no description is
configured for the subscriber
group.
6. Configure a match template for
the subscriber group.
match-template match-string
By default, no match template is
configured for the subscriber
group.
You can configure multiple match
templates for a subscriber group.
Configuring a caller group on a voice entity
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Create a voice entity and enter
voice entity view.
entity entity-number { pots |
voip }
N/A
5. Configure the voice entity to
permit or deny the calling
numbers in the specified
subscriber group.
caller-group { deny | permit }
group-id
By default, all calling numbers are
permitted.
Enabling private line auto ring-down
The private line auto ring-down (PLAR) function enables a subscriber line to automatically call the
specified called number when the phone goes off-hook.
To configure the PLAR function:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Enter subscriber line view.
subscriber-line line-number N/A
3. Configure PLAR.
private-line string By default, PLAR is not configured.