R0106-HP MSR Router Series Voice Configuration Guide(V7)

70
Step Command Remarks
6. Configure a number
substitution rule.
rule id input-template
output-template [ number-type
input-number-type
output-number-type |
numbering-plan
input-numbering-plan
output-numbering-plan ] *
By default, no number substitution
rule is configured.
7. (Optional.) Configure the
preferred number substitution
rule.
first-rule id
By default, the preferred number
substitution rule is not configured.
8. Return to dial program view.
quit N/A
9. Apply the number substitution
rule list to the calling/called
number of incoming/outgoing
calls.
substitute { incoming-call |
outgoing-call } { called | calling }
list-number
By default, no number substitution
rule list is applied.
Configuring number substitution for a voice entity
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Create a number substitution
rule list and enter
number-substitute view.
number-substitute list-number
By default, no number substitution
rule list exists.
5. Configure a dot match rule.
dot-match { end-only | left-right |
right-left }
By default, the dot match rule is
end-only.
6. Configure a number
substitution rule.
rule id input-template
output-template [ number-type
input-number-type
output-number-type |
numbering-plan
input-numbering-plan
output-numbering-plan ] *
By default, no number substitution
rule is configured.
7. (Optional.) Configure the
preferred number substitution
rule.
first-rule id
By default, the preferred number
substitution rule is not configured.
8. Return to dial program view.
quit N/A
9. Enter voice entity view.
entity entity-number { pots |voip } N/A
10. Apply the number substitution
rule list to the voice entity.
substitute { called | calling }
list-number
By default, no number substitution
rule list is applied to a voice entity.