R0106-HP MSR Router Series Voice Configuration Guide(V7)

71
Configuring number substitution for a voice interface
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Create a number substitution
rule list and enter
number-substitute view.
number-substitute list-number N/A
5. Configure a dot match rule.
dot-match { end-only | left-right |
right-left }
By default, the dot match rule is
end-only.
6. Configure a number
substitution rule.
rule rule-tag input-template
output-template [ number-type
input-number-type
output-number-type |
numbering-plan
input-numbering-plan
output-numbering-plan ] *
By default, no number substitution
rule is configured.
7. (Optional.) Configure the
preferred number substitution
rule.
first-rule rule-number
By default, the preferred number
substitution rule is not configured.
8. Return to dial program view.
quit N/A
9. Return to voice view.
voice-setup N/A
10. Return to system view.
system-view N/A
11. Enter voice interface view.
subscriber-line line-number N/A
12. Apply the number substitution
rule list to the voice interface.
substitute { called | calling }
list-number
By default, no number substitution
rule list is applied to a voice
interface.
Examples
This section provides examples for global number substitution, voice entity number substitution, and voice
interface number substitution.
Figure 28 Network diagram
Configuring global number substitution
# Create number substitution rule list 1 and add a rule to the list.
<RouterA> system-view
[RouterA] voice-setup
[RouterA-voice] dial-program
[RouterA-voice-dial] number-substitute 1