R0106-HP MSR Router Series Voice Configuration Guide(V7)

78
[RouterA-voice-dial] substitute incoming-call called 101
# Apply the number substitution rule list 102 to the calling numbers of incoming calls. This will
change the called numbers 0210001, 0210002, and 0210003 into 0211234, 0216788, and
0216565, respectively.
[RouterA-voice-dial] substitute incoming-call calling 102
# Configure the match template …. for POTS entity 1010, bind line 2/2/1 to the entity, and
configure the entity to send all the digits of a called number.
[RouterA-voice-dial] entity 1010 pots
[RouterA-voice-dial-entity1010] match-template ....
[RouterA-voice-dial-entity1010] line 2/2/1
[RouterA-voice-dial-entity1010] send-number all
Verifying the configuration
# Use phone 1688 to dial the number 0103366 to verify that phone 6788 rings and the displayed calling
number is 021123 4.
During the calling process, Router B changes the calling number 1688 into 0210001 and changes the
called number 0103366 into 0002, and then Router A changes 0210001 into 0211234 and changes
0002 into 6788.
Configuring caller group control
Network requirements
As shown in Figure 31, areas A, B, and C call each other through the SIP server. Configure caller group
control on Router A so when the SIP server fails, the areas call each other though the public PBXs in PSTN
as follows:
• The phone numbers starting with 1100 in area A can only call the phone numbers in area B.
• The phone numbers starting with 1200 in area A can call the phone numbers both in area B and
area C.
Figure 31 Network diagram
Router A
Router B
Router C
SIP server
IP
1100..
2100
2200
3100
3200
110000
110099
Internal PBX
120000
120099
1200..
Public PBX
Public PBX
Internal PBX
Public PBX
Internal PBX
Area A Area B
Area C
E1 2/4/1
E1 2/4/1