R0106-HP MSR Router Series Voice Configuration Guide(V7)

[RouterA-voice-dial-entity2100] line 2/4/1:15

[RouterA-voice-dial-entity2100] send-number all

[RouterA-voice-dial-entity2100] match-template 1.....

2. Configure Router B:

# Configure POTS entity 2100 to match local numbers and bind line 2/4/1:15 to the entity.

<RouterB> system-view

[RouterB] voice-setup

[RouterB-voice] dial-program

[RouterB-voice-dial] entity 2100 pots

[RouterB-voice-dial-entity2100] line 2/4/1:15

[RouterB-voice-dial-entity2100] send-number all

[RouterB-voice-dial-entity2100] match-template 2...

3. Configure Router C:

# Configure POTS entity 3100 to match local numbers and bind line 2/4/1:15 to the entity.

<RouterC> system-view

[RouterC] voice-setup

[RouterC-voice] dial-program

[RouterC-voice-dial] entity 3100 pots

[RouterC-voice-dial-entity3100] line 2/4/1:15

[RouterC-voice-dial-entity3100] send-number all

[RouterC-voice-dial-entity3100] match-template 3...

Verifying the configuration

# Place calls to verify that the phone numbers starting with 1100 in area A can only call the phone

numbers in area B.

# Place calls to verify that the phone numbers starting with 1200 in area A can call the phone numbers

both in area B and area C.

Configuring the maximum number of total calls

Network requirements

As shown in Figure 32, configure the maximum number of calls placed from Router A and Router B to

Router C.

Figure 32 Network diagram