R0106-HP MSR Router Series Voice Configuration Guide(V7)

[RouterB-voice-dial-entity2001] line 2/1/2

[RouterB-voice-dial-entity2001] quit

# Configure the maximum number of total calls allowed by VoIP entity 1000 as 2.

[RouterB-voice-dial] entity 1000 voip

[RouterB-voice-dial-entity1000] max-conn 2

3. Configure Router C:

# Configure the local number template as 010…. for POTS entity 1000, bind FXO interface line

2/2/1 to the POTS entity, and configure the number sending mode as all.

<RouterC> system-view

[RouterC-voice-dial] entity 1000 pots

[RouterC-voice-dial-entity1000] match-template 010....

[RouterC-voice-dial-entity1000] line 2/2/1

[RouterC-voice-dial-entity1000] send-number all

[RouterC-voice-dial-entity1000] quit

# Configure the local number template as 010…. for POTS entity 1001, bind FXO interface line

2/2/2 to the POTS entity, and configure the number sending mode as all.

[RouterC-voice-dial] entity 1001 pots

[RouterC-voice-dial-entity1001] match-template 010....

[RouterC-voice-dial-entity1001] line 2/2/2

[RouterC-voice-dial-entity1001] send-number all

[RouterC-voice-dial-entity1001] quit

# Configure the local number template as 010…. for POTS entity 1002, bind FXO interface line

2/2/3 to the POTS entity, and configure the number sending mode as all.

[RouterC-voice-dial] entity 1002 pots

[RouterC-voice-dial-entity1002] match-template 010....

[RouterC-voice-dial-entity1002] line 2/2/3

[RouterC-voice-dial-entity1002] send-number all

[RouterC-voice-dial-entity1002] quit

# Configure the local number template as 010…. for POTS entity 1003, bind FXO interface line

2/2/4 to the POTS entity, and configure the number sending mode as all.

[RouterC-voice-dial] entity 1003 pots

[RouterC-voice-dial-entity1003] match-template 010....

[RouterC-voice-dial-entity1003] line 2/2/4

[RouterC-voice-dial-entity1003] send-number all

Verifying the configuration

# Initiate the maximum number of concurrent calls, for example, from 1000 and 1001. (Details not

shown.)

# Initiate a call while the above calls are present to verify that the call is rejected. (Details not shown.)