R0106-HP MSR Router Series Voice Configuration Guide(V7)

90
Configuring registrar information
Perform this task to specify a registrar. The expires keyword sets the registration expiration time, and the
refresh-ratio keyword sets the refresh percentage. When the registration time reaches the registration
expiration time multiplied by the refresh percentage, a voice entity or SIP trunk re-registers the number
with the registrar to avoid expiration.
To configure registrar information:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter SIP view.
sip N/A
4. Configure the registrar
information for the SIP UA.
registrar registrar-index { ip ip-address
| dns domain-name } [ port
port-number ] [ expires seconds ]
[ refresh-ratio ratio-percentage ]
[ scheme { sip | sips } ] [ tcp [ tls ] ]
By default, no registrar information
is configured.
Displaying SIP UA registration status
Execute display commands in any view.
Task Command
Display SIP UA registration status. display voice sip register-status
Configuring the call destination address for a VoIP
entity
You can configure the call destination address for a VoIP entity in one of the following ways:
• Configure the call destination IP address.
• Configure the VoIP entity to obtain the call destination address from a proxy server.
• Configure the destination domain name and port number. Only DNS A records are supported. For
more information about DNS, see Layer 3—IP Services Configuration Guide.
Configuring the call destination IP address for a VoIP entity
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter voice view.
voice-setup N/A
3. Enter dial program view.
dial-program N/A
4. Enter VoIP entity view.
entity entity-number voip N/A
5. Configure the call destination
IP address.
address sip ip ip-address [ port
port-number ]
By default, no call destination
address is configured.