R0106-HP MSR Router Series Security Configuration Guide(V7)

128
• Then re-authenticate on the new Layer 2 port.
To enable portal roaming:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable portal
roaming.
portal roaming enable
By default, portal roaming is
disabled.
You cannot enable portal roaming
when login users exist on the device.
Logging out portal users
Logging out a user terminates the authentication process for the user or removes the user from the
authenticated users list.
To log out users:
Ste
p
Command
1. Enter system view.
system-view
2. Log out IPv4 portal users.
portal delete-user { ipv4-address | all | interface interface-type
interface-number }
3. Log out IPv6 portal users.
portal delete-user { all | interface interface-type interface-number |
ipv6 ipv6-address }
Displaying and maintaining portal
Execute display commands in any view and the reset command in user view.
Task Command
Display portal rules on an interface
(MSR2000/MSR3000).
display portal rule { all | dynamic | static } interface
interface-type interface-number
Display portal rules on an interface (MSR4000).
display portal rule { all | dynamic | static } interface
interface-type interface-number [ slot slot-id ]
Display portal configuration and portal running state
information on an interface.
display portal interface interface-type
interface-number
Display portal authentication server information. display portal server [ server-name ]
Display portal Web server information. display portal web-server [ server-name ]
Display packet statistics for portal authentication
servers.
display portal packet statistics [ server server-name ]
Display portal user information.
display portal user { all | interface interface-type
interface-number }
Clear packet statistics for portal authentication
servers.
reset portal packet statistics [ server server-name ]