R0106-HP MSR Router Series Security Configuration Guide(V7)

149
[RouterA-isp-dm1] accounting portal radius-scheme rs1
[RouterA-isp-dm1] quit
# Configure domain dm1 as the default ISP domain. If a user enters the username without the ISP
domain name at login, the authentication and accounting methods of the default domain are used
for the user.
[RouterA] domain default enable dm1
3. Configure ACL 3000 as the isolation ACL and ACL 3001 as the security ACL.
[RouterA] acl number 3000
[RouterA-acl-adv-3000] rule permit ip destination 192.168.0.0 0.0.0.255
[RouterA-acl-adv-3000] rule deny ip
[RouterA-acl-adv-3000] quit
[RouterA] acl number 3001
[RouterA-acl-adv-3001] rule permit ip
[RouterA-acl-adv-3001] quit
NOTE:
Make sure you specify ACL 3000 as the isolation ACL and ACL 3001 as the security ACL on the
security policy server.
4. Configure portal authentication:
# Configure a portal authentication server.
[RouterA] portal server newpt
[RouterA-portal-server-newpt] ip 192.168.0.111 key simple portal
[RouterA-portal-server-newpt] port 50100
[RouterA-portal-server-newpt] quit
# Configure a portal Web server.
[Router] portal web-server newpt
[RouterA-portal-websvr-newpt] url http://192.168.0.111:8080/portal
[RouterA-portal-websvr-newpt] quit
# Enable cross-subnet portal authentication on interface GigabitEthernet 2/1/2.
[RouterA] interface gigabitethernet 2/1/2
[RouterA–GigabitEthernet2/1/2] portal enable method layer3
# Reference the portal Web server newpt on interface GigabitEthernet 2/1/2.
[RouterA–GigabitEthernet2/1/2] portal apply web-server newpt
# Configure the BAS-IP as 20.20.20.1 for portal packets sent from GigabitEthernet 2/1/2 to the
portal authentication server.
[RouterA–GigabitEthernet2/1/2] portal bas-ip 20.20.20.1
[RouterA–GigabitEthernet2/1/2] quit
On Router B, configure a default route to subnet 192.168.0.0/24, specifying the next hop address as
20.20.20.1. (Details not shown.)
Verifying the configuration
# Verify that the portal configuration has taken effect.
[Router] display portal interface gigabitethernet 2/1/2
Portal information of GigabitEthernet 2/1/2
IPv4:
Portal status: Enabled