R0106-HP MSR Router Series Security Configuration Guide(V7)

150
Authentication type: Layer3
Portal Web server: newpt
Authentication domain: Not configured
BAS-IP: 20.20.20.1
User Detection: Not configured
Action for server detection:
Server type Server name Action
-- -- --
Layer3 source network:
IP address Mask
Destination authenticate subnet:
IP address Mask
IPv6:
Portal status: Disabled
Authentication type: Disabled
Portal Web server: Not configured
Authentication domain: Not configured
BAS-IPv6: Not configured
User detection: Not configured
Action for server detection:
Server type Server name Action
-- -- --
Layer3 source network:
IP address Prefix length
Destination authenticate subnet:
IP address Prefix length
Before passing portal authentication, a user that uses the HP iNode client can access only the
authentication page http://192.168.0.111:8080/portal. All Web requests from the user are redirected to
the authentication page.
• The user can access the resources permitted by ACL 3000 after passing only identity
authentication.
• The user can access Internet resources permitted by ACL 3001 after passing both identity
authentication and security check.
# After the user passes identity authentication and security check, use the following command to display
information about the portal user.
[Router] display portal user interface gigabitethernet 2/1/2
Total portal users: 1
Username: abc
Portal server: newpt
State: Online
Authorization ACL: 3001
VPN instance: --
MAC IP VLAN Interface
0015-e9a6-7cfe 8.8.8.2 -- GigabitEthernet2/1/2