R0106-HP MSR Router Series Security Configuration Guide(V7)

188
Ste
p
Command Remarks
6. Configure the password
complexity checking policy for
the local user.
password-control complexity
{ same-character | user-name }
check
By default, the settings equal those
for the user group to which the
local user belongs. If no password
complexity checking policy is
configured for the user group, the
global settings apply to the local
user.
7. Configure the login attempt
limit.
password-control login-attempt
login-times [ exceed { lock |
lock-time time | unlock } ]
By default, the settings equal those
for the user group to which the
local user belongs. If no
login-attempt policy is configured
for the user group, the global
settings apply to the local user.
Setting super password control parameters
The super password allows you to obtain a temporary user role without reconnecting to the device. For
more information, see Fundamentals Configuration Guide.
To set super password control parameters:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the password expiration
time for super passwords.
password-control super aging
aging-time
The default setting is 90 days.
3. Configure the minimum length
for super passwords.
password-control super length
length
• In non-FIPS mode, the default
setting is 10 characters.
• In FIPS mode, the default setting
is 15 characters.
4. Configure the password
composition policy for super
passwords.
password-control super
composition type-number
type-number [ type-length
type-length ]
• In non-FIPS mode, a default
super password must contain at
least one character type and at
least one character for each
type.
• In FIPS mode, a default super
password must contain at least
four character types and at
least one character for each
type.
Displaying and maintaining password control
Execute display commands in any view and reset commands in user view.
Task Command
Display password control configuration. display password-control [ super ]