R0106-HP MSR Router Series Security Configuration Guide(V7)

339
a. Launch PuTTY.exe to enter the interface shown in Figure 91.
b. In the Host Name (or IP address) field, enter the IP address 192.168.1.40 of the Stelnet server.
Figure 91 Specifying the host name (or IP address)
c. Click Open to connect to the server.
If the connection is successfully established, the system prompts you to enter the username and
password. After entering the username (client001) and password (aabbcc), you can enter the CLI
of the server.
Publickey authentication enabled Stelnet server configuration
example
Network requirements
As shown in Figure 92:
• You can log in to the router through the Stelnet client (SSH2) that runs on the host.
• After login, you are assigned the user role network-admin for configuration management.
• The router acts as the Stelnet server and uses publickey authentication and the RSA public key
algorithm.