R0106-HP MSR Router Series Security Configuration Guide(V7)

345
Figure 98 Specifying the private key file
g. Click Open to connect to the server.
If the connection is successfully established, the system prompts you to enter the username. After
entering the username (client002), you can enter the CLI of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in Figure 99:
• You can log in to Router B through the Stelnet client that runs on Router A.
• After login, you are assigned the user role network-admin for configuration management.
• Router B acts as the Stelnet server and uses password authentication.
• The username and password of the client are saved on Router B.
Figure 99 Network diagram
Configuration procedure
1. Configure the Stelnet server: