R0106-HP MSR Router Series Security Configuration Guide(V7)

390
Ste
p
Command Remarks
4. Configure an IPv6 address
object.
[ object-id ] network { host
{ address ipv6-address | name
host-name } | subnet ipv6-address
{ mask-length | mask } | range
ip-address1 ipv6-address2 |
group-object object-group-name } }
By default, no object exists.
Configuring a port object group
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure a port object group
and enter its view.
object-group port
object-group-name
The system has one default port
object group.
3. (Optional.) Configure a
description for the port object
group.
description text
By default, an object group does
not have a description.
4. Configure a port object.
[ object-id ] port { { eq | lt | gt }
port | range port1 port2 |
group-object object-group-name }
By default, no object exists.
Configuring a service object group
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure a service object
group and enter its view.
object-group service
object-group-name
The system has one default service
object group.
3. (Optional.) Configure a
description for the service
object group.
description text
By default, an object group does
not have a description.
4. Configure a service object.
[ object-id ] service { protocol
[ { source { { eq | lt | gt } port |
range port1 port2 } | destination
{ { eq | lt | gt | } port | range port1
port2 } } * | icmp-type icmp-code |
icmpv6-type icmpv6-code ] |
group-object object-group-name }
By default, no object exists.
Displaying and maintaining object groups
Execute display commands in any view.
Task Command
Display information about all IPv4 address object
groups.
display object-group ip address