R0106-HP MSR Router Series Security Configuration Guide(V7)

33
Step Command Remarks
3. Configure the attribute 15
check mode for SSH, FTP,
and terminal users.
attribute 15 check-mode { loose |
strict }
The default check mode is strict.
Enabling SNMP notifications for RADIUS
When SNMP notifications are enabled for RADIUS, the SNMP agent supports the following notifications
generated by RADIUS:
• RADIUS server unreachable notification—The RADIUS server cannot be reached. RADIUS
generates this notification if it does not receive a response to an accounting or authentication
request within the specified number of RADIUS request transmission attempts.
• RADIUS server reachable notification—The RADIUS server can be reached. RADIUS generates this
notification for a previously blocked RADIUS server after the quiet timer expires.
• Excessive authentication failures notification—The number of authentication failures compared to
the total number of authentication attempts exceeds the specified threshold.
You can configure SNMP parameters to control the output of these SNMP notifications. For more
information, see Network Management and Monitoring Configuration Guide.
To enable SNMP notifications for RADIUS:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable SNMP notifications for
RADIUS.
snmp-agent trap enable radius
[ accounting-server-down |
authentication-error-threshold |
authentication-server-down |
accounting-server-up |
authentication-server-up ] *
By default, all types of SNMP
notifications are enabled for
RADIUS.
Displaying and maintaining RADIUS
Execute display commands in any view and reset commands in user view.
Task Command
Display the RADIUS scheme
configuration.
display radius scheme [ radius-scheme-name ]
Display RADIUS packet statistics. display radius statistics
Clear RADIUS statistics. reset radius statistics
Configuring HWTACACS schemes
Configuration task list
Tasks at a
g
lance
(Required.) Creating an HWTACACS scheme
(Required.) Specifying the HWTACACS authentication servers