R0106-HP MSR Router Series Security Configuration Guide(V7)

51
Changing the DSCP priority for RADIUS packets
The DSCP priority in the ToS field determines the transmission priority of RADIUS packets. A larger value
represents a higher priority.
To change the DSCP priority for RADIUS packets:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Change the DSCP priority
for RADIUS packets.
radius [ ipv6 ] dscp dscp-value
By default, the DSCP priority is 0 for
RADIUS packets.
Setting the maximum number of concurrent login
users
Perform this task to set the maximum number of concurrent users who can log on to the device through a
specific protocol, regardless of their authentication methods. The authentication methods include no
authentication, local authentication, and remote authentication.
To set the maximum number of concurrent login users:
Step Command Remarks
1. Enter system view.
system-view N/A
2. Set the maximum number of
concurrent login users.
• In non-FIPS mode:
aaa session-limit { ftp | ssh |
telnet } max-sessions
• In FIPS mode:
aaa session-limit ssh
max-sessions
By default, the maximum number of
concurrent login users is 32 for
each user type.
Displaying and maintaining AAA
Execute the display command in any view.
Task Command
Display the configuration of ISP domains. display domain [ isp-name ]