HP MSR4000 Router Series Installation Guide

18
Grounding the router through the grounding terminal on the rack
IMPORTANT:
Make sure the rack is correctly grounded before grounding the router.
To connect the grounding cable:
1. Remove the two grounding screws from the rear panel of the chassis.
2. Attach the grounding screws to the ring terminal of the grounding cable.
3. Use a Phillips screwdriver to fasten the grounding screws into the grounding screw holes.
4. Remove the grounding screw from the grounding point on the rack.
5. Attach the other end of the grounding cable to the grounding point on the rack, and secure it with
a screw.
Figure 14 Grounding the router through the grounding terminal on the rack
1
2