Brocade Fabric OS Command Reference Manual (53-1000240-01, November 2006)

2-118 Fabric OS Command Reference Manual
Publication Number: 53-1000240-01
diagCommandShow
2
Note: Enter commands in lowercase only; mixed case is for readability.
diagCommandShow
Displays diagnostic command descriptions.
Synopsis diagcommandshow [command]
Description Use this command to display a short description of a diagnostic command.
N
ote
Use diagHelp to look up diagnostic command help pages.
You can issue this command on the FR4-18i blade in a SilkWorm chassis; however, the command is not
supported by the SilkWorm platform and does not effect any other feature operations. This availability
is offered to maintain consistency across a mixed-blade environment.
Operands This command has the following operands:
command Specify a command name to display more detailed information.
Examples To display a list of diagnostic commands, with descriptions:
See Also diagHelp
switch:admin> diagcommandshow
bladepropshow display blade properties
chippropshow display chip properties
chipregshow display contents of port registers
datatypeshow display available diagnostic data types
diagcommandshow display diagnostic command descriptions
diaghelp display diagnostic command descriptions
diagmodeshow display diagnostic mode configuration
diagoktorun check to see if it is ok to run a diagnostic test
diagshow display diagnostics status
diagstatus display currently running diagnostic tests
itemlist diagnostic list parameter syntax and grammar
information
minispropshow display mini-switch ASIC property
minisregshow display contents of mini-switch registers.
ptbufshow dump port buffer contents
(output truncated)